Date:2015-04-15

? ? Its structure consists of panels, stiffeners and corner codes and other components. Forming a maximum workpiece size up to 8000mm × 1800mm (L × W) coatings by the United States PPG, American Valspar Valspar, Akzo Nobel AkzoNobel, Korea and other famous brands KCC paints, coatings divided into two painted a roast, three painted two grilled, the coating performance to AAMA (American Architectural Manufacturers Association) and ASCA (American Architectural spray Association) AAMA2605-98 standards. Conventional thickness: 2.0mm, 2.5mm, 3.0mm. Common Specifications: 600 * 600mm, 600 * 1200mm

The following describes the calculation of the amount of aluminum square through the area:
Aluminum side through an open three-dimensional sense and a smallpox. Its flash seam pitch reference to the high side of the aluminum square pass to become square type. Affected party through the main cost variable height, bottom width, thickness, and processes.
General: M = H;
The formula is: 1 / H = the amount per square meter. (Note: H side to side through high)
Square meter is calculated through the general press, because the amount per square stitch density flash spacing varies. Spacing must be clear that the edge-to-edge, or in the middle size. Otherwise it will affect its aesthetic effect and the actual amount. Aluminum side through dedicated keel according to the actual needs of the different formulation, the amount of 1 per square meter hanging pieces 1, keel hanging pieces calculated separately. Guangzhou Fu Teng building materials available in 6 meters (6000mm) within the scope of any size to order. When you install the keel spacing between 800mm-1 000mm. Square block through two do if side through not long enough to do inside to pieces, but the training and joint seal must additionally calculations.
The main specifications of the aluminum side pass are:
Height generally, 20mm.30.mm.40mm.50mm.100mm and other highly customized according to the actual situation.
Width is usually: 10mm.15mm.20mm.50mm etc., the width can be customized according to the actual situation.
Thickness may be: 0.5mm-1.2mm and the like.
Color electrostatic powder coating, polyester paint coating, fluorocarbon coating, thermal wood handle various colors of your choice.